|
Adam Tech
Adam Tech, Adam Technologies, Inc provides advanced interconnect products and systems.
Their continuing goal is to offer a wide range of world class connectors and cable assemblies.
(back to top)
Aimtec
Aimtec is a global supplier of AC-DC and DC-DC power converters.
In addition to an expanding catalogue of over 3500 standard products,
Aimtec provides complete design and engineering support for customized products.
(back to top)
AirBorn **
For nearly 50 years AirBorn has been at the forefront of the innovation, design and
manufacturing of high reliability connector technology.
ISO9001:2000 and AS9100:2001 Section 1
Mil Spec Listing:
(back to top)
Alpha Electronics **
Alpha Electronics Corp. provides sales, and service of Ultra-Precision Metal Foil and Thin Film Resistors,
and Resistance Standards.
(back to top)
Ametherm
Ametherm provides NTC thermistors, PTC thermistors and in rush current surge limiters with a
wide range of resistance and current carrying capabilities.
(back to top)
ASC Capacitors
For over 50 years, American ShiZuki Corporation (ASC) has been the manufacturers of
Metallized Film and Film/Foil Capacitors in Polypropylene, Polycarbonate and Polyester
for various electronic applications.
Oil Filled, Box Motor Run and Ballast Capacitors for AC applications.
ISO 9001:2000
(back to top)
Circuit Functions **
Circuit Functions, Inc (CFI) has specialized in manufacturing high voltage ceramic capacitors since 1968. CFI takes pride in its commitment to provide the highest quality multilayer ceramic chip capacitors & leaded capacitors with unsurpassed lead times in the industry. In addition to the high voltage ceramic capacitors, high temperature ceramic capacitors, and “tight” tolerance ceramic capacitor product line, CFI also specializes in custom design capacitors. These components support a variety of markets including commercial, telecommunications, aviation and aerospace, oil service and exploration (down hole), and other high temperature applications.
(back to top)
Cissoid **
CISSOID is the leader in high temperature semiconductor solutions, delivering
standard products and custom solutions for power management, power conversion and
signal conditioning in extreme temperature and harsh environments.
CISSOID provides high reliability products guaranteed from -55°C to +225°C
and commonly used outside that range, from cryogenic lows to upper extremes.
Whether the ambient temperature is low but the power dissipation heats up the chips,
or in high temperature environments, CISSOID products enable energy, weight and cost savings in
lighter, cooling-free and more compact electronic systems.
They are used in mission-critical systems as well as in applications requiring long term reliability.
CISSOID supplies leaders in the Oil & Gas, Aeronautics, Industrial, and Automotive markets.
(back to top)
Conta Clip **
Since 1977, Conta-Clip has gained recognition as a leading manufacturer of innovative products
which provide solutions for electrical and electronic connection applications.
The products include Din Rail Terminal Blocks, PC Board Terminal Blocks, Ferrules, and Interface Modules.
(back to top)
EBG **
EBG's a leading manufacturer of standard and custom precision, high voltage, high power,
non-inductive, thick film resistors offers such characteristics as very low and controlled
temperature and voltage coefficients, high stability,
high temperature operations and very tight tolerances.
ISO 9001
(back to top)
EDAC
EDAC is a global supply chain leader in standard, custom, variant, and semi-custom
interconnect solutions including card-edge, rack/panel, D-sub, specialty and waterproof connectors.
RoHS Compliant / ISO 9001:2000
(back to top)
|
|
Federal Mogul
(aka: Bently Harris) **
Federal-Mogul Corporation is an innovative and diversified global supplier of quality products,
trusted brands and creative solutions.
Through their l Systems Protection’s Innovative Technology Solutions (ITS) division,
they offer a comprehensive line of products to protect components against abrasion, thermal
management, electromagnetic shielding and electrical issues.
(back to top)
Johanson Dielectrics **
Johanson Dielectrics products range from high volume, low cost capacitors to application specific ceramic solutions. Product offerings include the following capacitors: Ceramic SMT and Leaded High Voltage and High Temperature, Y2 Safety Certified, Tip & Ring, Tanceram (for Tantalum replacement), Dual and Multi Capacitor Arrays, Low Inductance, X2Y, Switchmode.
(back to top)
Johanson Technology **
Johanson Technology provides High Frequency Ceramic Solutions for cellular, WLAN, Bluetooth, RF/Microwave, Millimeter Wave, and Fiber Optic applications, as well as custom high frequency ceramic solutions. Additional product offerings are: a broad range of Multi and Single Layer Capacitors, RF Inductors, LTCC based Chip Antennas, Baluns, Balanced Filters, Band Pass Filters, Low Pass Filters, Couplers, and Diplexers, and more.
(back to top)
Linear Integrated Systems
Small Signal Discrete Product line consists of: Bipolar Transistors, DMOS Switches,
Current Regulating Diodes, JFET's, Low Leakage Diodes, MOSFETS, and Voltage Controlled Resistors.
(back to top)
Mallory Sonalert
Mallory Sonalert® Products, Inc. manufactures and distributes the Mallory brand Sonalert
electronic audible signal product line as well as supplies a full range of board-level
audible devices such as transducers, indicators and sirens to the industrial,
military and consumer markets.
(back to top)
Min-E-Con **
Min-E-Con has been among the leaders in the design and manufacture of high-density
microminiature connection devices.
The proven reliability of our "Fifty-Lok" contact design and it's inherent low
insertion forces have made it the preferred choice of many users.
(back to top)
Norcomp
NorComp, is a leader in the design and worldwide manufacture of I/O interconnect products,
marketing a broad range of D-Sub, SCSI and Delta Ribbon connectors and backshells.
The company focus is on providing comprehensive interconnect solutions to the challenges posed
by emerging electronic platforms.
(back to top)
P D & E Electronics **
PD&E is a major supplier of high voltage assemblies, voltage regulator modules, and power converters.
They are a full-service custom electronics company with design, manufacturing, and testing capabilities.
Their quality parts are hand built by skilled craftsman directly overseen by engineers.
(back to top)
RCD **
If you're still looking for the best resistors, you've found them.
Capacitors, Coils and Delay lines too!
Our 'ABZED'TM (Absolute Zero Defect) Continuous improvement Program
is resulting in ever improved quality levels, via emphasis on total quality,
just-in-time delivery, total preventive maintenance, employee involvement,
and simplicity.
(back to top)
RIA Connect
RIA CONNECT Manufacturing European Terminal BLocks, RJ-45 Jacks and Telecom Jacks
for the World Market. Our mission is to provide quality, competitively priced connectivity
solutions for products used in a variety of industrial and commercial applications.
(back to top)
|
|
Riedon **
Riedon has built an enviable reputation manufacturing wirewound power and precision
resistors for over 40 years. Riedon offers an exceptional range of resistor products using
metal foil, metal film and thick film elements, as well as our wirewound designs.
(back to top)
Semiconductor
Technology, Inc. **
The discrete semiconductor source for high voltage, n-channel, mosfet, high voltage and
NPN / PNP bipolar transistor technology.
(back to top)
Sumitomo **
Sumitomo Electric is a leading manufacturer, seller and servicer of heat-shrinkable
products worldwide. SUMIMARK® II is a computer controlled thermal marking system
designed to provide permanent alpha-numeric, barcode and graphic images on a wide variety
of heat-shrinkable tubing. SUMITUBE® heat-shrinkable tubing meets all major commercial
and military specifications including AMS-DTL-23053, UL and CSA.
(back to top)
Thin Film Technology **
Thin Film Technology Corp. (TFT) services high speed digital, ATE, communications,
computing, and automotive markets.
TFT's products include; delay lines both differential & single, equalizers, filters,
termination networks, precision resistors, inductors, and capacitors.
(back to top)
Vanguard **
Vanguard is an acknowledged leader in the magnetics industry. They design and manufacture
devices include power transformers, power inductors, RF transformers, and RF inductors for
commercial, military and space applications since 1952.
(back to top)
Vectron International **
With over 50 years if experience, Vectron is a leader in providing frequency control and
hybrid solutions to their customers around the world. Their innovative approach to design
and manufacture has resulted in an advanced Frequency Control product offering.
(back to top)
Viking Tech Corporation
**
Viking Tech was established in October 1997 at Hsin-Chu Science-Based Industrial Park, Taiwan, as the leader in the design,
manufacturing and marketing of Thin-Film / Thick-Film integrated passive devices and discrete passive components.
To meet more and more demands of further miniaturization and higher frequencies of passive components,
they developed innovative technology, combining the technical advantages of thin film processes and low cost of thick film processes
to develop unique Precision Resistors, Current Sensing Resistors and RF inductors.
Viking has quickly become one of leading manufacturers of ultra-precision resistors,
manufacturing tolerances down to 0.01% tolerance and TCR's down to 5 ppm.
With leading edge technology and competitive costs, the demand for Viking products has grown rapidly.
With an aggressive capital investment plan to increase capacity,
Viking continues to offer the shortest lead-time in the market.
(back to top)
Vishay Foil Resistors
**
Vishay Foil Resistors is a division of Vishay Precision Group (VPG), producing the most
precise and stable resistors available.
VPG is an NYSE company that was a recent spin-off from Vishay Intertechnology, Inc.
The Vishay Foil Resistors portfolio comprises products in a variety of resistor configurations
and packages to meet the needs of a wide range of applications: discrete resistors and
resistor networks in surface mount and through-hole (leaded) configurations; customized
chip resistor networks; precision trimming potentiometers; and discrete chips for use in
hybrid circuits.
The foil resistors and current sensors are used in applications requiring a high degree of
precision and stability, such as in medical testing equipment, high performance audio
equipment, precision measuring instruments and aerospace and military applications.
(back to top)
X-REL Semiconductors **
X-REL Semiconductor (X-REL) is a spin-off of EASii IC, dedicated to the design, manufacturing and commercialization of High Reliability and High Temperature integrated circuits (ICs). Application fields serviced range from Aeronautics & Space, Transportation & Automotive, Harsh Environments, Oil & Gas, Industrial and Geothermal. Products produced are for power management, data conversion, signal conditioning, clock & timing and passives. These products are made to reliably perform for years while ensuring the reduction of the overall system costs all along the product lifecycle.
(back to top)
|
